The SCUBATEC 90° HP Swivel is a high-pressure angled fitting designed to be mounted directly on the HP (High Pressure) outlet of the first stage.
Its primary function is to allow correct positioning and orientation of the pressure gauge hose, diverting its outlet by 90°. This prevents sharp or forced bends near the regulator, reducing mechanical wear on the hose and ensuring a cleaner, more hydrodynamic, and stress-free configuration.
Main Features:
-
Specific HP Connection: Equipped with a standard High-Pressure thread (7/16"-20 UNF), designed solely for the HP port of first stages.
-
Universal Compatibility: Screws onto all commercially available first stages with an HP port.
-
Optimized Hose Routing: Allows the pressure gauge hose to be directed along the tank or the diver's side with a neat profile.
-
Chrome-Plated Marine Brass Construction: Designed by SCUBATEC with materials resistant to salt corrosion to ensure maximum safety under high operating pressure.
Maintenance Tip: As it is subjected to high pressures (up to 300 bar), it is recommended to rinse thoroughly with fresh water after each dive and to check the port gasket/O-ring before each assembly.
