Compact technical backplate made of stainless steel, ideal for divers between 150 and 170 cm tall.
The original Tecline MIDI Plate, available on DIR-STORE, is the reduced inter-axis and profile version of the standard technical backplate. Made of the highest quality 3 mm thick stainless steel, it is specifically designed to offer perfect trim and superior anatomical comfort to divers of small to medium height (between 150 and 170 cm), preventing the standard plate from hitting the lumbar area or the back of the neck.
Key Features and Benefits:
-
Ergonomic MIDI Geometry: With a height of 36.0 cm (compared to 39.5 cm for the standard version), it perfectly adapts to the backs of shorter-torso divers, improving cylinder stability and freedom of movement.
-
Optimal Intrinsic Weight: The structural weight of approximately 2.10 kg allows the weight to be transferred from the waist belt or weight pockets directly to the diver's center of gravity, significantly improving trim and hydrodynamic posture in the water.
-
Precision Chamfering: All slots for the continuous harness and the perimeter edges are laser-cut and fully machine-beveled to prevent wear or cutting of the webbing and the back volume wing.
-
Standardized Slots and Holes: Features central holes with a standard 11-inch spacing for direct coupling to twin cylinders or single cylinder adapters (STA), complemented by side slots for attaching accessory or weight pockets.
Technical Specifications (Comparison with Standard):
-
Height: 36.0 cm (Standard: 39.5 cm)
-
Upper Width: 18.5 cm (Standard: 20.5 cm)
-
Lower Width: 21.5 cm (Standard: 25.5 cm)
-
Thickness: 3 mm
-
Material: High-strength marine grade Stainless Steel
-
Total weight: approximately 2.10 kg
-
Recommended height target: From 150 cm to 170 cm
