F10 first stage service kit

The Scubatec F10 First Stage Overhaul Kit, distributed by DIR STORE, is the original set of critical spare parts needed for the routine maintenance of this specific hyper-balanced diaphragm regulator.

As a "Service Kit," it consists exclusively of parts subject to wear or mechanical deformation that must be replaced periodically (usually annually or every 100 dives) to ensure maximum reliability and safety.

Kit Composition

The kit includes all the soft and sealing internal components necessary for a complete overhaul. Although the exact list may vary slightly based on production updates, the standard components included are:

• Main Diaphragm: The core of the F10 first stage, made of high-strength elastomer to ensure correct ambient pressure transmission.
• HP Seat: The high-pressure sealing component that interfaces with the orifice. It is the most stressed element of the entire regulator.
• Complete O-Rings: A series of sealing rings in various compounds (usually EPDM or Viton for compatibility with enriched air mixtures) for:
• Swivel turret (if present in the specific version).
• Transmission pin.
• LP (low pressure) and HP (high pressure) port plugs.
• DIN connector (O-ring seal on the cylinder).
• Sintered Filter: A cup-shaped or disc-shaped element placed at the air inlet to retain impurities and moisture from the cylinder.
• Locking Ring/Clip: Any metal retainers or Teflon (PTFE) gaskets for the sliding seats.

Technical Specifications:

• Compatibility: Exclusive to the Scubatec F10 first stage (not compatible with F20 or F30 series unless otherwise specified by the manufacturer).
• Certification: Original Scubatec spare parts, essential for maintaining the regulator's CE marking.
• Materials: Selected to withstand high pressures and low temperatures (crucial for the F10, often used in technical configurations or cold waters).

Important Safety Notes

• Professional Maintenance: Overhauling a first stage is a critical operation for diver safety. This kit must be installed exclusively by authorized technicians or personnel who have attended Scubatec maintenance courses.
• Cleaning: Before installing the kit, the first stage body must be thoroughly cleaned in an ultrasonic cleaner with suitable solutions to remove limescale and oxidation.
• Lubrication: Use only oxygen-compatible silicone grease (e.g., Christo-Lube) in minimal quantities.

• Dichiarazione e limitazione di responsabilità