Tecline Stage Harness for S80 (11.1 L)
The Tecline S80 stage harness is a professional kit designed to manage the typical size and trim variations of the 11.1-liter aluminum cylinder. This system is designed to keep the S80 perfectly aligned with the diver's body, preventing the bottom of the cylinder from "floating" upwards as gas is consumed.
Built to rigorous DIR standards, the Tecline harness combines mechanical robustness and aesthetic versatility, offering the choice between the classic and Military Line configurations. Each component is selected to withstand the wear and tear typical of open water, cave, or wreck diving.
Technical Specifications:
-
Compatibility: S80 aluminum cylinders (11.1 liters / 184 mm diameter)
- Carabiner Options (Bolt Snap 120 mm):
-
Stainless Steel Silver: The traditional choice in polished AISI 316 steel.
-
Stainless Steel Black (Military Line): Version with a high-resistance matte black finish, ideal for those seeking a stealth profile.
-
Elastic Strap: 2 high-density rubber bands with a loop for a secure grip.
-
Fixing Strap: Adjustable stainless steel strap with protective Cordura/fabric sleeve.
-
Line: High-tenacity nautical line (4 mm) with reinforced tubular protection.
-
Manufacturer: Tecline
Key Features:
-
S80 Control: The line length and strap positioning are optimized to counteract the positive buoyancy of the S80 at the end of the dive, keeping the diver hydrodynamic.
-
Military Series: The availability of 120 mm Black carabiners ensures a professional look and reduces reflections, without sacrificing ease of handling with dry or thick gloves.
-
Manifold Security: The use of nautical line instead of plastic straps ensures that the harness will not give way under the weight of a full cylinder or during dry transport.
-
Gas Management: The elastic bands are sized to securely hold the regulator hose, allowing it to be smoothly pulled out only when necessary for gas switching.
Expert Advice: For optimal S80 setup, position the lower strap approximately 15-20 cm from the bottom of the cylinder. This will allow you to attach the stage so that it remains horizontal and does not interfere with finning.
