Tecline XTR Carbon LP Hoses (Miflex) – Regulator and BCD/Drysuit

Low-pressure (LP) hoses braided with reinforced nylon and a "Carbon Look" finish, ideal for regulators, BCDs, and drysuits in recreational and technical DIR configurations.

Tecline XTR Carbon (Miflex) hoses, available at DIR-STORE, represent the technological evolution of braided hoses for diving. Featuring the unmistakable "Carbon Look" technical finish, they combine a professional aesthetic with superior mechanical performance, designed to withstand the most extreme conditions of use.

The structure ensures extreme flexibility, no kinking even in the tightest bends, and a 30% weight reduction compared to traditional rubber hoses.

Common Technical Features (XTR Carbon Series):

• Multilayer Structure: Polyurethane inner tube protected by a high-density braided nylon sleeve for maximum pressure and abrasion resistance.
• Extreme Flexibility: Miflex technology allows the hose to bend freely without kinking, ensuring clean routing under the arms or behind the neck.
• Superior Lightness: Weigh approximately 30% less than rubber hoses, reducing jaw tension (in regulator versions) and the overall weight of the kit.
• Resistance to External Agents: High protection against UV rays and the marine environment, preventing hardening and cracking over time.
• Carbon Look Aesthetic: A finish with a strong visual impact, ideal for those seeking chromatic uniformity in technical equipment.
  

1. LP Regulator Hoses (XTR LP Hose Carbon)

Designed for connection from the first stage to the second stage of the regulator.

Connections: Standard 3/8" Male (first stage) and 9/16" Female (second stage)

Lengths and Recommended Use:

• 56 cm / 62 cm: Neck regulator (neckloop / backup) or compact recreational configurations.
• 70 cm / 75 cm: Standard for single-tank configurations.
• 90 cm / 100 cm: Stage cylinders, decompression stops, or Sidemount configurations.
• 120 cm: Specific Sidemount routing or dedicated configurations.
• 150 cm / 210 cm: Long Hose version for gas donation in technical DIR, twin-tank, and Sidemount configurations.

2. LP Jacket / Drysuit Hoses (XTR Inflator Hose Carbon)

Designed to supply the BCD or drysuit via the inflation valve.

Connections: Standard 3/8" Male (first stage) and Standard Quick Release

Lengths and Recommended Use:

• 20 cm / 25 cm: Argon cylinders or compact redundant configurations.
• 40 cm / 45 cm: Sidemount or drysuit valves very close to the first stage.
• 51 cm / 55 cm / 61 cm: Connection to the BCD/jacket corrugated hose to maintain a hydrodynamic profile.
• 65 cm / 70 cm / 75 cm: Standard size for connection to the drysuit inflation valve.
• 90 cm: Larger body types or particular routing.

DIR-STORE Tip: Choose the variant (Regulator or Inflator) and the ideal length from the dropdown menu to optimize the trim and management of your hoses.